User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 28
To Set the Alarm Abort Time:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the S
ECURITY submenu.
Press the Enter button to access the submenu.
3. Select A
LARM ABORT TIME.
4. Using the numeric keypad, set the alarm abort time between 01
– 99 seconds, or set it to 00 to disable the option.
Hide Display
Enables you to specify that when armed, the system will not display
the system statuses or other prompts; by default, H
IDE DISPLAY is off.
To Hide / Display the System Status:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the S
ECURITY submenu.
Press the Enter button to access the submenu.
3. Select H
IDE DISPLAY.
4. Use the Up and Down buttons to select one of the following
options and press Enter to confirm:
• Off to display status and prompts.
• On to hide status and prompts.
Key Beeps
Choose to turn Key beeps on to hear a beep on each key press; by
default, the Key beeps is off.
To Set the Key Beeps:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the S
ECURITY submenu.
Press the Enter button to access the submenu.
3. Select K
EY BEEPS.