User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 19
5.2.4 Security
The following is a list of the various security features of the system:
• Exit Delay
• Entry Delay
• Auto Arming Schedule
(for every day of the
week)
• Siren Time
• Siren Mode
• Enable Local Siren
• Supervision Time
• Enable Jamming
• No Activity Time
• Enable Trouble Beeps
• Bypass Option
• Enable Forced Arm
• Quick Arm
• Instant Arm
• Emergency Alarm Mode
• Duress Code
• Alarm Cancel
• Alarm Abort Time
• Hide Display
• Key Beeps
Exit Delay
An exit delay enables the user to arm the system, and exit the site
through a specified door, after arming the system, without setting off
an alarm.
Slow-rate warning beeps sound when the system is armed, the
beeping rate increases during the last ten seconds of the delay. The
exit delay is set at 30 seconds by default.
To Specify the Exit Delay:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the S
ECURITY submenu.
Press the Enter button to access the submenu.
3. Select Exit Delay.
4. Using the numeric keypad, specify the length of time for the exit
delay between 1 and 99 seconds and press Enter to save your
selection.
Note:
Use the # key to delete a digit entered by mistake.