User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 17
5.2.1 Change Code
This option enables you to change the installer code with which you
enter the system. The default code is 8888.
To change the Installer Code:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down buttons to locate the CHANGE
CODE
submenu. Press the Enter button to access the submenu
3. Type a new four-digit installer code and press Enter to save your
new code.
5.2.2 Zone Options
This menu allows you to define each of the 16 available zones. You
can define the zone type, description, activity type and it’s audible
chime indication.
To specify Zone Behavior and Options:
1. Access the Installer menu as explained on page 16.
2. Use the Up and Down button to locate the Z
ONES submenu.
Press the Enter button to access the submenu.
3. Select the required zone by either browsing all 16 using the Up
and Down buttons and confirm with Enter or by entering the zone
number, using the numeric keypad.
4. Once in the desired zone, use the Up and Down buttons to
browse the options, press Enter to access the desired sub menu in
order to define several characteristics as follows:
• Zone Type; select one of the following:
o Interior
o Perimeter
o Delay
o Fire
o 24 Hour
Silent
o 24 Hour
Audible
o Chime
• Description; select one of the fixed descriptions or one of the
five (5) editable custom descriptions.
• Chime; select one of three chimes, or chime off. By default,
zone is
CHIME OFF.
• No Activity; select E
NABLE or DISABLE, By default the option is
D
ISABLE