User Guide

PROGRAMMING
SP-03V2 Installation Manual
Page 16
5 PROGRAMMING
5.1 Overview
SP-03V2 must be programmed after installation. You can use the
backup battery or the AC power supply as operating power while
programming.
SP-03V2 is provided with two default codes:
• Default installer code: 8888 – Enables you to program SP-03V2
• Default Master code: 1234 – Enables you to change the master
code and modify the User and Master options
We recommend that you change the master and installer codes
after using them for the first time.
5.2 Installer Menu
The Installer’s menu enables access to the following group of
options:
• Change (installer) code
• Zones
• Enrolling
• Security
• Communications
• Messages
• Maintenance
• Select Language
To Enter the Installer Menu:
1. Press Menu until the screen displays Installer Menu.
2. Press Enter.
3. Enter the installer code; the default code is 8888.
4. Once in the INSTALLER
MENU use the Up and Down buttons to
scroll the sub menus. Press Enter to access the desired sub menu
as detailed below.