User Guide

INSTALLATION
SP-03V2 Installation Manual
Page 13
4 INSTALLATION
4.1 Unpacking the Equipment
The contents of your package are listed below.
First, make sure that all the items in the kit have been included.
If you find that any item is missing, contact your dealer immediately.
SP-03V2 Elderly Phone package content
• One SP-03V2 Elderly Care Telephone - Wireless Emergency System
• One Handset
• One Handset cord
• One AC-DC power adapter
• One Telephone cord.
• One Rechargeable lead-acid battery
4.2 Getting to Know the SP-03V2
The SP-03V2 resembles an intelligent telephone set with a
speakerphone and a handset; however, it has several additional
keys, which are used for programming the system as detailed in the
SP-03V2 OVERVIEW, on page 7.
4.3 Planning the Installation
The tables located in Appendix A. through Appendix D. on page
51, to 54 can assist you to plan and register the location of each
detector. Mark the transmitters and detectors in the supplied tables
accordingly.
4.4 Installing the Backup Battery
The battery is installed by opening the battery door located on the
bottom of the SP-03V2. Turn the SP-03V2 over to see the battery door.
To install the Backup Battery:
1. Remove the screw that secures the battery door; use a small
Phillips head screwdriver and turn the screw counterclockwise.
Need new
drawing, since the
keypad has been
updated.