User Guide

SPECIFICATIONS
SP-03V2 Installation Manual
Page 11
3 SPECIFICATIONS
RF Data
RF Unit Type
Integrated RF transceiver (two-way) shielded
super heterodyne, fixed frequency
Antenna Type
Printed PCB type antenna
Operating
Frequencies
433.92 MHz G series
868.35 MHz H series
Receiver
Sensitivity
Up to -68 dBm
Transmitter
Power
Up to +10 dBm, less based on country
requirements
Range
(open field)
Up to 250 m in open space for detectors, and 110
m for hand-held remote controls
RF Device ID
Coding
Three-bytes non-replicated per sensor type, or
multiples of 16 million possible codes, make it
almost impossible to have two like coded
transmitters
The SP-03V2 system has optimum range if installed according to the
manufacturer’s recommendations, however it may be affected by
radio noise from nearby high-power sources, or signal interference
(blocking) by large metal surfaces or multiple concrete walls.
Environmental Data
Operating Temperature
0º – 60º C (32º F - 140º F)
Storage Temperature
-25 º – 70º C (-13º F - 158º F)
Relative Humidity
85% at 30º C Non condensing
Dimensions
L x W x D
220 x 140 x 48 mm
8.7 x 5.5 x 1.9 inch
Weight
595 gr. (1.3 lbs.)