User Guide

SP-03V2 OVERVIEW
SP-03V2 Installation Manual
Page 10
Quick Dial
Number
Behavior
0 to 9
Indicates the quick-dial number to call.
UP or DOWN
Initiates a menu for displaying and selecting the
required number.
2.3 Sound Indicators
Following are the sounds emitted by the system and push buttons:
Sound
Sounded when
Single beep
A key is pressed
Long beep
An attempt is made to enter an invalid or
unacceptable entry
Four short
beeps a
minute
If enabled, on trouble condition.
Short beep
every second
An exit/entry delay is activated.
Beep sounded every 0.5 seconds during last 10
seconds of delay.
Chime
Activated (if enabled). Three programmable
chime types available
2.4 LED Indicators
This section describes the status and communication LED indicators.
LED
Behavior
Status LED
Red
on when the system is armed and blinking
while the system is arming.
Communication
LED
Green ON when the phone line, Modem or
TCP/IP Channel are active.