User's Manual

Introduction
Page 3 SA-80A Installation Manual
1. Introduction
Rosslare’s SA-80G wireless Siren Annunciator is used in commercial,
industrial, and residential locations, either indoors or outdoors. The
rugged packaging, styled to fit into any décor, can be mounted
on a wall in any direction. This Product must be installed
professionally. The siren is capable of providing audible alerts for
fire, alarm, and tampering, at levels difficult to ignore. A strong,
flashing signal helps to identify the source of the alarm from a
distance.
• The SA-80G wireless Siren Annunciator includes an RF
transceiver module that operates over 433.92 MHz.
The SA-80G wireless unit operates with burglar (intrusion) alarm
control panels and fire alarm control panels, such as the
HomeLogiX, manufactured by Rosslare. It can also operate with
Any interference or vandalism, which would be a result of trying to
remove the cover from the unit, or tear the unit from the wall,
would cause the unit to immediately report such an event by
transmitting to the control panel.
Priorities for sounding off alarms are according to:
1) Fire
2) Alarm (panic)
3) Tamper
Alarms are activated/deactivated from the remote control panel
or from any telephone.
This product has only one available channel.
Pursuant to FCC §15.21 [ 54 FR 17714 , Apr. 25, 1989, as amended
at 68 FR 68545 , Dec. 9, 2003], changes or modifications made to
equipment, which are not expressly approved by Rosslare
Enterprises, Ltd., may void the user's authority to operate the
equipment.