User's Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Operating the HLX-24
- 4. System Overview
- 5. User Menu Structure
- 6. Telephony Voice Response Menu
- 7. Reading the Event Log
- 8. User Menu Options
- 8.1 Accessing the User Menu
- 8.2 Changing the Master Code
- 8.3 Defining User Codes
- 8.4 Authorization Codes
- 8.5 Silent Exit
- 8.6 Setting Date and Time
- 8.7 Defining Date and Time Format
- 8.8 Setting Zone Bypass
- 8.9 Enrolling a Remote Control
- 8.10 Deleting a Remote Control
- 8.11 Setting Phone Numbers
- 8.12 Registration Code (HLX-24IP model only)
- 9. Maintenance
- A. Declaration of Conformity
- B. Limited Warranty
User Menu Options
30 HLX-24 User Manual
8.11 Setting Phone Numbers
You can specify up to three private telephone numbers that are called by the
wireless panel when an event occurs.
To define phone numbers:
1. Using the Menu button, select Private Numbers and press Enter.
2. Using the Menu button or numeric keypad, choose between private
numbers 1, 2 or 3 and press Enter.
3. Using the numeric keypad, enter the telephone number and press Enter
to confirm.
4. Press the pound key (#) to delete an existing number.
The private numbers are set.
For PABX, use the digit followed by "," and then the full number.
8.12 Registration Code (HLX-24IP model only)
The registration code is the MAC address of the HLX-24IP control panel. This is
used to create a user account when using the HomeLogiX™APP, which allows
you to control and monitor your HLX-24IP control panel from a smartphone.
For more information see the
HLX-24 Mobile Application User Manual
.