HLX-24TH Family Advanced Wireless Security Panels User Manual
Copyright © 2015 by Rosslare. All rights reserved. This manual and the information contained herein are proprietary to ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’ (hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to use the information. No part of this manual may be re-produced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of ROSSLARE.
Table of Contents Table of Contents 1. Introduction ....................................................................... 8 2. Technical Specifications ................................................... 9 3. Operating the HLX-24 ..................................................... 10 3.1 Quick Reference ............................................................................... 10 3.2 About Everyday Operation ................................................................ 10 3.
Table of Contents 6. Telephony Voice Response Menu .................................. 23 6.1 General ............................................................................................ 23 6.2 Arming Submenu ............................................................................. 23 6.3 Automation Submenu ...................................................................... 24 6.4 Status Report .................................................................................... 24 7.
List of Figures List of Figures Figure 1: HLX-24 Panel ................................................................................. 15 Figure 2: The Keypad.................................................................................... 18 Figure 3: Replacing the Backup Batteries.......................................................
List of Tables List of Tables Table 1: Quick Reference to Keypad Buttons................................................. 10 Table 2: HLX-24 Wireless Panel ..................................................................... 16 Table 3: Display Options ............................................................................... 17 Table 4: Keypad Functions ............................................................................ 18 Table 5: Sound Indicators ..........................................
Notice and Disclaimer Notice and Disclaimer This manual’s sole purpose is to assist installers and/or users in the safe and efficient installation and usage of the system and/or product, and/or software described herein. BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM, THE INSTALLER AND THE USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY REQUIREMENTS AND OPERATING PROCEDURES. The system must not be used for purposes other than those for which it was designed.
Introduction 1. Introduction The HLX-24 family of panels by Rosslare is the perfect wireless security system for intrusion protection of the home, or small office providing security monitoring and telephony IVR Voice messaging. Users receive the latest RF technology in a wide selection of advanced wireless sensors and remotes, and benefit from smooth and easy operation of a large number of security and communication options.
Technical Specifications 2. Technical Specifications Electrical Characteristics External Power Supply 220 VAC/50 Hz, 110 VAC/60 Hz Operating Voltage Range 15 VDC, 800 mA Input Current Standby: 150 mA Max: 300 mA Backup Batteries 4 AA (1800 mAh rechargeable batteries are included) Display Two Line, 16 characters, white backlit LCD PGM Open Collector Output 100 mA, PTC protected Local Siren 87 dBA @ 1 m (3.28 ft) Communication (RF) Characteristics Frequencies 433.92 MHz (G version) 868.
Operating the HLX-24 3. Operating the HLX-24 This chapter describes the day to day operation of the system, as well as provides a quick reference for the Arming/Disarming buttons in the system. 3.1 Quick Reference Use the following buttons on the keypad for quick arming the system: Table 1: Quick Reference to Keypad Buttons AWAY Arms all sensors and detectors for use when there is no one at home/office. HOME Arms all perimeter sensors and detectors as defined by the installer.
Operating the HLX-24 3.3.2 Arm Home Home arming is an arming of all perimeter sensors and detectors as defined by the installer. This is intended for when home or office is occupied. To arm the sy stem using HOME: 1. Verify that the system is ready for arming. 2. Press the HOME arming key. 3. Enter your user code. If the user arms the system as HOME by remote control, a squawk acknowledgement is produced twice in the local sounders. 3.3.
Operating the HLX-24 If Silent Exit is active, the Exit Time is doubled for that exit period only, but does not exceed 255 seconds. During Home arming, the system ignores all interior zones as well as the predefined delay zones. 3.3.7 Exit Restart When this feature is enabled, an Exit Restart delay occurs on the second zone opening within the same zone and the Exit Delay time is doubled. If it is disabled, the same zone may be opened several times while in the Exit Delay countdown. 3.
Operating the HLX-24 3.5 System Alarm Alarms trigger for panic, fire, 24-hour audible and silent conditions for 24 hours a day, 7 days a week. When premises are in Armed Away, all delayed, interior, and perimeter zones are protected. When premises are in Armed Home (Stay), all delayed and perimeter zones are protected (interior zones are ignored). Once in Alarm mode, the system transmits an alarm event to the monitoring station (if configured).
Operating the HLX-24 3.5.5 Fire Alarm Fire alarm verification is an available option on fire zones. When used the system begins and Alarm Transmission Sequence once the conditions for fire alarm verification are met. The Fire Verify setting double checks the state of the fire detectors. When there is a fire sensor alarm signal, a siren is heard immediately. A 60second retard-reset period starts during which every additional fire alarm signal is ignored.
System Overview 4. System Overview The main components of the HLX-24 wireless panel are: HLX-24 Wireless Panel The LCD Display The Keypad Sound Indicators 4.1 LED Indicators HLX-24 Wireless Panel Figure 1 presents the components of the wireless panel.
System Overview Table 2 describes the components in the panel: Table 2: HLX-24 Wireless Panel Menu Use to navigate between menus Power indicator Power LED Red on: system is ON Red flashing: AC power failure Status indicators on the ‘Arm Home’, Disarm and Arm Away buttons Status LED Green LED when the system is disarmed using the ‘Disarm’ button Red on: System armed Red off: System disarmed Flash: Entry and exit delay (according to beep rate) Keypad door Open to access the keypad buttons Local sounde
System Overview Table 3: Display Options System Status Ready Indicates that all zones are in Normal state and the system is ready for arming. Not ready Indicates that at least one zone is open and the system is not ready for arming. Press Enter to see which zones are open. If there is more than one open zone, pressing Enter or Menu displays the next open zone. When there are no more open zones, the display returns to the idle view.
System Overview 4.3 The Keypad The keypad is used to program the wireless panel and to arm and disarm the sensors.
System Overview 4.4 Sound Indicators Table 5 describes the sounds are emitted by the system and keypad: Table 5: Sound Indicators Sound Sounded When Single beep A key is pressed Long Beep Illegal key entry Three short beeps An entry is successfully accepted. Four short beeps a minute If enabled, on trouble condition. Short beep every second An exit/entry delay is activated. (Beep sounded every 0.5 seconds during last 10 seconds of delay. This table does not include actual alarm sounds.
System Overview Table 8: Keypad Function Indicators Panel Status Panic Arm Away Arm Home Disarm Disarm OFF OFF OFF ON Arm Home OFF OFF ON OFF Arm Away OFF ON OFF OFF Arming Home OFF OFF OFF FLASHES every 1 second (until last 10 seconds flashes every 0.5 seconds) Arming Away OFF FLASHES every 1 second (until last 10 seconds flashes every 0.
User Menu Structure 5. User Menu Structure The User menu enables configuring the basic user settings, such as setting the date and time and changing user codes. You can define one Master user and up to twenty additional users, each with an individual code. Settings marked with an “M” can be accessed by the Master user only, and appear only if the master code is entered.
User Menu Structure Select To Zone Bypass Enables you to arm the system by bypassing/un-bypassing selected zones (see Section 8.8). This option is enabled if manual bypass has been enabled by the installer. Note: Zone bypass can be triggered only if the zone was enrolled. Remote Controls Enroll remote controls for quick activation of the system (see Section 8.9) (M) Private Numbers Specify up to three private telephone numbers (see Section 8.11).
Telephony Voice Response Menu 6. Telephony Voice Response Menu 6.1 General IVR (Interactive Voice Response) features include telephony voice assistance, where the panel uses voice through the telephone to prompt the user. Either the system or a remote private telephone can initiate an IVR session. IVR session Initiated by a Remote Telephone User: The remote telephone user initiates an IVR session by calling the system’s number. The system answers after a preset number of rings.
Telephony Voice Response Menu Please note that when arming, the status change is only announced after the exit delay timeout. Disconnect the phone to terminate the session or press 0 to return to the previous menu. 6.3 Automation Submenu After entering the automation submenu, you hear the following: Press 0 to return to the previous menu The system then requests the following: Press 1 to turn the PGM on Press 2 to turn the PGM off.
Reading the Event Log 7. Reading the Event Log The HLX-24 event log stores up to 250 events. When the log is full, the new incoming event replaces the oldest event. Events are displayed in a chronological order and include the date and time of their occurrence. To access the Ev ent Log: 1. Access the event log by pressing 8 on the keypad when the system is in Normal mode. 2. To read an event, enter the master code and press Enter. 3.
User Menu Options 8. User Menu Options 8.1 Accessing the User Menu To access the User menu: 1. 2. Press the Menu button to reach the User menu and press Enter. You are asked to enter the Master code. Enter your 4-digit Master code. Entering the correct code brings you to the user menu submenus. If a wrong code is entered, the system emits a long beep indicating an error and waits once again for the correct code to be entered. Inactivity for 30 seconds causes the system to return to Normal mode. 3.
User Menu Options 8.4 Authorization Codes You can set the code that is used to configure the system’s settings with the remote programming software HR-P02. To set the authorization codes: 1. Using the Menu button, select Authorization Code and press Enter. 2. Using the numeric keypad, type a 4-digit code and press Enter to save. 8.5 Silent Exit You can choose between disabling and enabling the progress annunciation during exit delay. The default is Disabled. To set the silent ex it: 1.
User Menu Options 4. Specify the format in which the date is displayed: DD-MM-YY or MM-DDYY. 5. Press Enter to confirm your selection. The date and time format is set. 8.8 Setting Zone Bypass You can define certain zones to be bypassed when arming the system to deal with different situations, such as when the sensors battery is low and is sending an event, or when arming the system while someone is still on premises in certain areas.
User Menu Options 6. Arm the system using one of the arming options. 7. To arm the system again using the same bypass settings, press 6 followed by one of the arming buttons. 8.9 Enrolling a Remote Control You can enroll up to eight remote controls, and specify functions for each button on the remote control. The default functions are ARM AWAY, ARM HOME, OFF, PANIC, and STATUS (voice announcement of panel status).
User Menu Options 8.11 Setting Phone Numbers You can specify up to three private telephone numbers that are called by the wireless panel when an event occurs. To define phone numbers: 1. Using the Menu button, select Private Numbers and press Enter. 2. Using the Menu button or numeric keypad, choose between private numbers 1, 2 or 3 and press Enter. 3. Using the numeric keypad, enter the telephone number and press Enter to confirm. 4. Press the pound key (#) to delete an existing number.
Maintenance 9. Maintenance This chapter is for the installer. 9.1 Dismounting the Control Panel To release the panel from the mounted back-plate: 1. 2. 3. 9.2 Unlock the locking hooks on the top of the back plate by lifting them up and out of the recesses on top of the panel. Pull the top of the panel away from the wall to disconnect the connector from the back-plate. Remove the panel from the lower posts of the back-plate. Replacing the 4 AA Backup Batteries To replace the backup batteries: 1. 2. 3.
Declaration of Conformity A. Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Limited Warranty B. Limited Warranty The full ROSSLARE Limited Warranty Statement is available in the Quick Links section on the ROSSLARE website at www.rosslaresecurity.com. Rosslare considers any use of this product as agreement to the Warranty Terms even if you do not review them.
HLX-24 Rosslare Enterprises Ltd. Kowloon Bay, Hong Kong Tel: +852 2795-5630 Fax: +852 2795-1508 support.apac@rosslaresecurity.com United States and Canada Rosslare Security Products, Inc. Southlake, TX, USA Toll Free: +1-866-632-1101 Local: +1-817-305-0006 Fax: +1-817-305-0069 support.na@rosslaresecurity.com Europe Rosslare Israel Ltd. Rosh HaAyin, Israel Tel: +972 3 938-6838 Fax: +972 3 938-6830 support.eu@rosslaresecurity.
