User's Manual
Table Of Contents
- 1. Introduction
- 2. HLX-24 Quick Reference
- 3. Specifications
- 4. Installation
- 5. Programming the HLX-24
- 6. Installer Menu
- 6.1 Change Code
- 6.2 Zones
- 6.3 Enrolling
- 6.4 Security
- 6.4.1 Exit Delay
- 6.4.2 Exit Restart
- 6.4.3 Entry Delay
- 6.4.4 Auto Arming
- 6.4.5 Siren Time
- 6.4.6 Siren Mode
- 6.4.7 Local Siren
- 6.4.8 External Siren
- 6.4.9 Supervision Time
- 6.4.10 Jamming
- 6.4.11 No Activity Time
- 6.4.12 Trouble Beeps
- 6.4.13 Bypass Option
- 6.4.14 Quick Arm
- 6.4.15 Arm Instant
- 6.4.16 Panic Button
- 6.4.17 Duress Code
- 6.4.18 Alarm Cancel
- 6.4.19 Alarm Abort Time
- 6.4.20 Backlight Time
- 6.4.21 Hide Display
- 6.4.22 Key Beeps
- 6.4.23 Select Language
- 6.4.24 EN-CENELEC
- 6.4.25 CP-01
- 6.5 Communications
- 6.6 Automation
- 6.7 Messages
- 6.8 Maintenance
- 7. User Menu Structure
- 8. Reading the Event Log
- A. Quick Reference to Installer Menu
- B. Quick Reference to User Menu
- C. Sensor Placement and Helpful Reference Tables
- D. Reporting Codes
- E. GSM Stick Errors
- F. Settings Requirements for CENELEC
- G. Default Parameter Values
- H. Labeling Instructions
- I. Declaration of Conformity
- J. Limited Warranty
User Menu Structure
HLX-24 Hardware Installation and Programming Manual 51
7. User Menu Structure
The user menu enables basic user settings such as Time & Date update and
user codes edit (Table 11).
Table 11: User Menu Structure
Select To
Edit Master Code
Change the Master code
User Codes
Specify user codes 1 through 20. If the user code exists, you can
edit the code or delete the code.
Authorize Code
Specify the code used to configure the system’s settings with the
remote programming software HR-P02.
The default code is 1234.
Silent Exit/Entr
Choose between disabling and enabling the progress annunciation
during entry or exit delay.
The default is Disabled.
Set Date & Time Set the time and date, as specified in Date & Time Format.
Date & Time
Format
Specify the format in which the date is specified: 24 hour format
or AM/PM.
Specify the format in which the date is specified: DD-MM-YY or
MM-DD-YY
Zone Bypass
Enable if manual bypass has not been set to Off by the installer. It
enables you to bypass and un-bypass selected zones.
Remote controls Enroll remote controls (see Section 6.3.2)
Private Numbers
Specify up to three private telephone numbers.
PC Mode
Enable or disable PC connection and activity when GSM expansion
is installed; otherwise PC mode is enabled automatically.