User's Manual

Installer Menu
48 HLX-24 Hardware Installation and Programming Manual
The seventh submenu is Messages , which deals with custom text zone
descriptions. Browse the desired setting, as described in detail below, using
Menu. Press Enter to access it.
6.7.1 Keypad Mute
This option allows you to enable or disable the option to mute all the voice
messages and beeps (except for trouble beeps, forced arming, enrollment and
RF test of wireless devices) by numeric key 5 of the keypad as described in
Section
2.2.1. By default, this option is Disabled.
To set up keypad mute:
1. Using Menu, Enable or Disable the option.
2. Press Enter to confirm your selection.
6.7.2 House Name
This option enables you to type the House Name as defined in the system.
To set up and review the house name:
1. In the HOUSE NAME menu, use Menu to locate the ENTER HOUSE NAME
submenu.
a. Press Enter to access the submenu.
Use the alphanumeric keypad to type the desired house name. Use #
to delete the last entered value.
b. Press Enter to confirm.
6.7.3 Custom Zones
Enables you to record and listen to five voice and text custom zones
descriptions and to toggle between them. On each zone, the user can simply
edit the text by typing the keypad buttons. The text is limited to 16 characters.
1. Using Menu, locate the ENTER ZONE NAME submenu.
 Press Enter to access the submenu.
Use the alphanumeric keypad to type the desired house name. Use #
to delete the last entered value.
 Press Enter to confirm.
2. Repeat steps 1 through 3 for each of the 5 (five) custom zones.
Reset to factory settings does not delete these recordings.