User's Manual

Installer Menu
HLX-24 Hardware Installation and Programming Manual 47
6.6.2 Set Triggers
This option enables you to activate the PGM using various events in an
automated fashion. By default, no triggers are set.
To set up triggers:
1. Using Menu, select PGM Trigger and press Enter to confirm.
2. You can select the pulse time and triggers as described below:
a. Pulse time – Set the length of time for the device to stay on when a
pulse type activation is selected. Using the numeric keypad, set the
time from 1 to 99 seconds and press Enter to save.
b. Select the trigger type and parameters according to Table 10. Use
only one trigger for each PGM simultaneously.
Table 10: Trigger Type and Parameters
Trigger PGM Activation
Options
Remarks
Arm Away
On, Off, Pulse, Ignore
Arm Home
On, Off, Pulse, Ignore
Disarm
On, Off, Pulse, Ignore
Alarm
Enabled, Disabled Go OFF when alarm stops
Panic
Pulse, Ignore
Trouble
Pulse, Ignore
AC Loss
Enabled, Disabled ON when AC fails, OFF when AC
returns
Exit/Entry
Enabled, Disabled Annunciation of exit/entry beeps
of remote sounder
Remote Control
On, Off, Pulse, Trouble, Ignore Relates to remote’s panic button
Zone
On, Off, Pulse, Trouble, Ignore Relates to zone open or detection
6.7 Messages
Change Code
Zones
Enrolling
Security
Communications
Automation
MESSAGES
Maintenance
Keypad Mute
House Name
Custom Zones