User's Manual

Installer Menu
44 HLX-24 Hardware Installation and Programming Manual
i. Using Menu, choose the reporting options for each group
as desired. The options are Disable and Enable. The available
reporting groups are:
 Alarms
 Troubles
 Alerts
 Bypass
 Arm/disarm
 Restore
ii. Press Enter to confirm.
iii. Press ESC to exit the submenu.
 Ack Timeout – Specify the time that the system has to send a
report event before the report alert is discontinued.
i. Using the alphanumeric keypad, set the value of the Ack
timeout to a value of 10 to 60.
ii. Press Enter to confirm.
 Signal Gain – Specify the strength of the DTMF.
i. Using the alphanumeric keypad, set the value of the signal
gain to a value of between 300 and 1200.
ii. Press Enter to confirm.
 Call Wait Cancel – Specify whether call waiting interferes in the
event transmission to the central station by dialing *70 and
entering the central station phone number. The default setting is
Disabled.
c. CS Secondary – Specify the secondary Central Station (see CS
Primary above for detailed options and instructions).
d. CS Protocol – Specify the reporting protocol used by the system to
report events to the central stations. Currently only Contact ID is
available.
e. Dialing Attempts – Specify the number of times the system
attempts to dial the primary stations number before attempting to
dial the secondary number. The default is 3 attempts.
i. Using the numeric keypad, enter the dialing attempts value
between 1 and 15.
ii. Press Enter to save.