User's Manual

Installer Menu
42 HLX-24 Hardware Installation and Programming Manual
6.5.1 System Telephone
This menu allows you to specify the telephone number used for the ring back
option when calling the system telephone.
To set up the system telephone:
1. Press Enter to access the Telephone Number submenu.
2. Using the numeric keypad, enter the system telephone number. Use * to
enter a comma. Use # to delete the last digit.
3. Press Enter to confirm.
When setting up the system telephone, use a comma (,) to indicate a delay
when dialing a number.
6.5.2 Private Report
This menu enables you to set the private telephone report options as detailed
below.
To set up private report:
1. Using Menu, select each of the following submenus and press Enter to
confirm:
a. Set Numbers – Specify the telephone numbers of the subscribers to
which the system reports. You can enter up to three numbers.
i. Using Menu, choose between number 1, 2 or 3 and press
Enter.
ii. Using the numeric keypad, enter the telephone number and
press Enter to confirm. Use * to enter a comma. Use # to delete
the last digit.
b. Report Options – Specify the event groups that are included in a
report.
2. Using Menu, choose the reporting options for each group as desired. The
options are Disable and Enable.
3. Press Enter to confirm. The available reporting groups are:
 Alarms (Voice by default)
 Troubles (Voice by default)
 Alerts
 Bypass
 Arm/disarm
 Restore
4. Press ESC to exit the submenu.