User's Manual

Installer Menu
HLX-24 Hardware Installation and Programming Manual 35
 Communication failure (system)
 Tamper (system and zones)
 RF jamming
The default is set to Disabled.
The HLX-24 allows you to enable the beeps for daytime only 8:00 AM to 8:00
PM.
To specify trouble beeps:
1. Using Menu, choose Disable, Day & Night (enable), or Day Only for
the trouble beeps.
2. Press Enter to confirm.
6.4.13 Bypass Option
Specifies either manual bypassing of individual zones, or enables the system to
forcedly arm open zones when armed. Bypass is turned off by default.
To set bypass:
1. Using Menu, select one of the following options:
 Off to set the bypass off
 Off/Force allows forced arming (automatic bypass) only
 Manual allows manual bypass only
 Manual/Force allows both forced arming (automatic bypass) and
manual bypass
2. Press Enter to confirm.
6.4.14 Quick Arm
Enables the user to arm the system without entering a code; Quick Arm is set
to disable by default.
To enable/disable quick arm without a code:
1. Using Menu, select either Enable or Disable.
2. Press Enter to confirm.
To utilize quick arm:
1. Press continuously on the AWAY or HOME keys to arm AWAY or
HOME.
6.4.15 Arm Instant
Enables the user to instantly arm the system by bypassing the Exit Delay; Arm
Instant is set to disable by default.
To enable/disable the Arm Instant option:
1. Using Menu, select either Enable or Disable.
2. Press Enter to confirm.