User's Manual

Installer Menu
HLX-24 Hardware Installation and Programming Manual 33
7. Set the Alarm Duration between 1 to 9999 minutes, or enter 0 (zero), to
disable Auto Arm Duration. The panel remains armed until disarmed by an
authorized user.
6.4.5 Siren Time
This specifies the amount of time the siren sounds when an alarm has been set
off. The siren time is set to three minutes by default. This relates to all siren
types, wired, wireless and local.
To specify the siren time:
1. Using the numeric keypad, specify the length of the siren time between
01 and 15 minutes
2. Press Enter to save your selection.
6.4.6 Siren Mode
You can specify whether you want the siren to be activated when armed in
Away mode only or when armed both in away and home arming modes. The
siren mode is set to Away + Home by default. This relates to all siren types,
wired, wireless and local.
To specify the siren mode:
1. Using Menu, select one of the following options: Away or Away +
Home.
2. Press Enter to confirm.
6.4.7 Local Siren
Specifies whether an activated alarm causes an internal siren (emitted from the
system’s speaker) to sound or remain silent. The local siren is enabled by
default.
To set up a local siren:
1. Using Menu, select either Enable or Disable.
2. Press Enter to confirm.
6.4.8 External Siren
Enables or disables the wireless sirens. Wireless sirens are enabled by default.
To set up external wireless sirens:
1. Using Menu, select either Enable or Disable.
2. Press Enter to confirm.
6.4.9 Supervision Time
The supervision time submenu specifies the time limit during which the system
receives supervision reports from specified wireless devices. If a device does not
report in at least once within the specified time limit, the system initiates an
inactivity alert. The default supervision time is set to one hour.