User's Manual

Installer Menu
30 HLX-24 Hardware Installation and Programming Manual
If the selected location has a keypad enrolled, you are asked whether you
wish to delete it.
4. Press Enter to delete or ESC to go back
6.3.5 Repeaters
You can enroll up to four repeaters. You can choose to remove enrolled
repeaters.
To enroll/remove a repeater:
1. Select the required repeater location, #01–04 by either browsing the keys
using Menu or by entering the repeater’s number using the numeric
keypad.
2. Enroll the repeater when the
WAIT FOR SIGNAL option is displayed, by
activating the tamper.
3. When the signal is detected, you are asked to press Enter to store and
save your selection
If the selected location has a repeater enrolled, you are asked whether you
wish to delete it.
4. Press Enter to delete or ESC to go back
6.4 Security
The following is a list of the system’s security features.
Change Code
Zones
Enrolling
SECURITY
Communications
Automation
Messages
Maintenance
Exit Delay
Exit Restart
Entry Delay
Auto Arming
Siren Time
Siren Mode
Local Siren
External Siren
Supervision Time
Jamming
No Activity Time
Trouble Beeps
Bypass Option
Quick Arm