User's Manual
Table Of Contents
- 1. Introduction
- 2. HLX-24 Quick Reference
- 3. Specifications
- 4. Installation
- 5. Programming the HLX-24
- 6. Installer Menu
- 6.1 Change Code
- 6.2 Zones
- 6.3 Enrolling
- 6.4 Security
- 6.4.1 Exit Delay
- 6.4.2 Exit Restart
- 6.4.3 Entry Delay
- 6.4.4 Auto Arming
- 6.4.5 Siren Time
- 6.4.6 Siren Mode
- 6.4.7 Local Siren
- 6.4.8 External Siren
- 6.4.9 Supervision Time
- 6.4.10 Jamming
- 6.4.11 No Activity Time
- 6.4.12 Trouble Beeps
- 6.4.13 Bypass Option
- 6.4.14 Quick Arm
- 6.4.15 Arm Instant
- 6.4.16 Panic Button
- 6.4.17 Duress Code
- 6.4.18 Alarm Cancel
- 6.4.19 Alarm Abort Time
- 6.4.20 Backlight Time
- 6.4.21 Hide Display
- 6.4.22 Key Beeps
- 6.4.23 Select Language
- 6.4.24 EN-CENELEC
- 6.4.25 CP-01
- 6.5 Communications
- 6.6 Automation
- 6.7 Messages
- 6.8 Maintenance
- 7. User Menu Structure
- 8. Reading the Event Log
- A. Quick Reference to Installer Menu
- B. Quick Reference to User Menu
- C. Sensor Placement and Helpful Reference Tables
- D. Reporting Codes
- E. GSM Stick Errors
- F. Settings Requirements for CENELEC
- G. Default Parameter Values
- H. Labeling Instructions
- I. Declaration of Conformity
- J. Limited Warranty
Installation
HLX-24 Hardware Installation and Programming Manual 19
4.4 Wiring the System
Figure 3 shows the various HLX-24 connections, which are described in Table
8.
Figure 3: Panel Wiring
Table 8: HLX-24 Connections
Input Description
PGM
Terminal blocks for PGM activation
VIN
Input voltage from AC/DC adaptor VIN = 13.8–15
LINE (RJ-11)
Telephone line in (from the wall to the system)
PHONE (RJ-11)
Telephone line out (from system to telephone device)
MD-62 Connection Socket
Connection socket for 10-pin plug connecting panel to
PC with MD-62
Battery Compartment
4 AA rechargeable batteries
Wall Tamper Switch
Tamper switch is pressed when the panel is mounted on
the wall
Ethernet (RJ-45)*
Connection to the HomeLogiX™APP server
* HLX-24IP models only