User Manual

Operating the HLX-40
HomeLogiX, HLX-40 User Guide
Page 7
there is a zone violation—regardless of perimeter or interior
type.
To arm the system using Away:
1. Verify that the system is ready for arming.
2. Press the Away arming key.
3. Enter your user code.
2.3.2. Arm Home
Home arming is a perimeter arming of all perimeter sensors and
detectors as defined by the installer. For use when home /
office is occupied.
To arm the system using Home:
1. Verify that the system is ready for arming.
2. Press the Home arming key.
3. Enter your user code.
2.3.3. Disarmed
When disarmed, the HLX-40 system enters Alarm mode for
each 24 hour zone. Alarms will trigger only for panic,
emergency, fire, 24H audible and silent conditions.
In this state, the system continuously checks zone status and
will hold the Ready status parameter. This parameter
determines whether the system is ready to arm. The system will
become Ready to Arm when zones are either closed or
bypassed, or force arming is enabled.
To disarm the system:
1. Press the Disarm key.
2. Enter your user code.