User Manual
Table Of Contents
- HLX-40 User cover september 2010
- HLX-40 User Guide Body 190910
- 1. Introduction
- 2. Operating the HLX-40
- 3. Technical Specifications
- 4. System Overview
- 5. User Menu Structure
- 6. VIP Menu
- 7. READING THE EVENT LOG
- 8. SMS Commands
- 9. User Menu Options
- 10. Maintenance
- HLX-40 User cover september 2010
VIP Menu
HomeLogiX, HLX-40 User Guide
Page 22
6.2 Arming submenu
After entering the arming submenu the following options are
available:
• Press 1 to “Arm Away”
• Press 2 to “Arm Home”
• Press 3 to “Disarm”
• Press 0 to return to the previous menu
The system status will be announced.
Please note that when arming, the status change will only be
announced after the exit delay timeout.
Disconnect the phone to terminate the session or press 0 to
return to the previous menu.
6.3 Automation Submenu
After entering the automation submenu you will hear the
following:
“Please select PGM”:
• Press 1 for PGM 1
• Press 2 for PGM 2
• Press 0 to return to the previous menu
The system will then request the following:
• Press 1 to turn the PGM on
• Press 2 to turn the PGM off.
Note that no acknowledgment will be heard after your
selection, disconnect the phone to terminate the session or
press 0 to return to the previous menu.
6.4 Voice Operation Submenu
After entering the Voice operation submenu the following
options are available:
• Press 1 for two-way voice activation
• Press 2 to record a personal message
• Press 3 to listen to a personal message
• Press 0 to return to the previous menu