User Manual

System Overview
HomeLogiX, HLX-40 User Guide
Page 16
Key
Press to
0
normal
mode only
Memory Display
Press once to display the alarms caused
during the last arming period per zone. The
first line of the displays shows the alarm
memory, and the second line shows the
zone description, event and time.
Press Enter to toggle view between zone
description and the Time & Date.
Press Menu to display the next event.
Press Esc to exit.
You can also use 0 to insert a space when
typing an entry.
1
normal
mode only
PGM ON - if enabled by installer
Press once to enter PGM activation mode,
the PGM status is indicated on the right.
Press 1 to activate PGM 1 and/or 2 to
activate PGM 2.
2
normal
mode only
PGM OFF - if enabled by installer
Press once to enter PGM deactivation
mode, the PGM status is indicated on the
right. Press 1 to deactivate PGM 1 and/or 2
to deactivate PGM 2.
3
normal
mode only
Chime ON/OFF
Manually toggle the chime on and off (if
enabled by the installer) The default is off.
4
normal
mode only
Volume
Manually Adjust the system’s volume level.
5
normal
mode only
Sound ON/OFF - if enabled by installer
Manually toggle voice messages, keypad
tone, and other sounds on and off.
(except
for trouble beeps, forced arming,
enrollment and RF test of wireless devices
which is always on)
6
normal
mode only
Bypass - if enabled by installer
Enter the last User menu Bypass option to
arm the system by bypassing active zones.
You must enter a user or master code.