User's Manual
Table Of Contents
- Table of Contents
- 1. Checking Before Use
- 2. Introduction
- 3. Configuration
- 4. How to use Terminal
- Appendix 1 Glossary
- Appendix 2 Declaration of Conformity
- Appendix 3 Radio Equipment Directive (RED)
- Appendix 4 RoHS Directive
AY-B9350 User Manual 46
3.7. Terminal Setting
3.7.1. Sound
Select [Terminal]
[Sound] in the main menu to display the screen below.
▶ Default setting: same with the setting in the left
screen
▶ Voice volume
Scroll to the left/right in 0~15 steps to set voice
size. Press [
] button on the right to play voice in
order to check voice volume.
▶ Beep volume
Scroll to the left/right in 0~3 steps to set buzzer
sound size. Press [
] button on the right to make
buzzer sound in order to check buzzer sound
volume.
▶ User voice
To change voice which outputs when authentication is successful or failed, copy the
relevant voice to the terminal and then check at this option to output user voice. For
the method to copy voice to the terminal, refer to 3.10. SD card [theme] or 3.11.2
voice message change.
To apply the setting value, press [OK] button, or press [BACK] button to cancel and to
move to the upper menu. To continuously set another item, press the relevant menu item
button on the left