User's Manual
Table Of Contents
- Table of Contents
- 1. Checking Before Use
- 2. Introduction
- 3. Configuration
- 4. How to use Terminal
- Appendix 1 Glossary
- Appendix 2 Declaration of Conformity
- Appendix 3 Radio Equipment Directive (RED)
- Appendix 4 RoHS Directive
AY-B9350 User Manual 23
Input user ID to be registered and press [OK] button.
In this case, ID which can be registered is
automatically displayed in the screen. Hence,
registration is easy and convenient. To change ID,
Press [
] button to delete the existing value and
to input a new one.
Press [BACK] button to cancel and move out.
If an already registered ID is input, failure message will be displayed. If it is an
unregistered ID, the screen below will be displayed.
Each icon has the following meaning.
: number of registered face
: number of registered fingerprint templet (X, 2~20)
: whether password is registered (X: not registered,
O: registered)
: whether card is registered (X: not registered, O:
registered)
: user ID to be registered
: user
: administrator
button: take user’s picture to register it
Press [name] to register name, press [Fingerprint] to register fingerprint, press
[face] to register face, press [card] to register card, press [password] button to
register password. Basically, everybody is registered as a user. Press [administrator]
button to convert into an administrator. To save registration after completing, press
[Save] button or press [Cancel] or [BACK] button to cancel input or to move out of it.
※ Only the user who is registered as an administrator can change operation method for
the terminal, and can register/change/delete information of all users saved at the
terminal. Hence, care is required to register administrator.