User's Manual

Introduction
AY-R6255 Installation and Operation Manual 7
1. Introduction
The AY-R6255 is 13.56 MHz RFID reader and is installed when using
access control systems. This is a unique product that has a variety of
options to control the reader's illumination according to various
settings. An example of this are the settings that enable users to set
the reader to project green light when everything is normal and red in
case of emergency; this is done by adjusting the inputs accordingly.
This product is compatible with any Rosslare controller that supports
Wiegand 26-Bit, Wiegand 32-Bit, Wiegand 34-Bit, or Wiegand 40-Bit
protocols, as well with any third-party controllers that support the
same Wiegand inputs.
The panel links are used to set various conditions between events and
outputs to get the required illumination from the reader.