User's Manual

Controller Functionality
AYC-x6355 Installation and User Manual 53
 Secondary codes cannot be the same as any system codes, such
as the Normal/Secure or Lock Strike codes.
 Users who hold Secondary codes can gain entry in any mode of
operation.
8.9.13.3 Enrolling Primary and Secondary Codes
There are two methods to enroll Primary and Secondary codes:
 Standard Method
The Standard Method is mainly used when the user slot number
for the user you wish to program is known. You can program
both Primary and Secondary codes using the Standard method
(see Section 8.9.13.4).
 Code Search Method
The Code Search Method is mainly used when enrolling a user’s
Secondary code and the user slot code is unknown.
The Code Search method only works if a user’s Primary code is
already enrolled but the Secondary code is not (see
Section 8.9.13.5).
8.9.13.4 Enrolling Primary & Secondary Codes using Standard
Method
1. Enter Programming mode.
2. Press 7 to enter Menu 7.
The Door LED turns orange.
3. Enter the 3-
digit user slot number
between 001and 500 that you
wish to enroll a Primary or
Secondary code to.
For example, User Slot 003
represents User #3.
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Orange