User's Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Mounting
- 4. Wiring Instructions
- 5. OSDP Operation
- 6. Reader Functionality
- 6.1 Transmit Mode
- 6.2 Programming as a Reader
- 6.3 Setting the Backlight
- 6.4 Return to Factory Default Settings
- 6.5 Replacing a Lost Programming Code
- 7. Controller Functionality
- 7.1 Normal, Secure, and Master Users
- 7.2 Modes of Operation
- 7.3 Auxiliary Input and Output
- 7.4 Door Alarms
- 7.5 Internal Case and Back Tamper
- 7.6 Lockout Feature (Keypad/Card Tamper)
- 7.7 REX Function
- 7.8 Secured Intelligent Power Supply
- 7.9 Programming as a Controller
- 7.9.1 Entering Programming Mode
- 7.9.2 Exiting Programming Mode
- 7.9.3 Changing Lock Strike Code
- 7.9.4 Changing Auxiliary Code
- 7.9.5 Changing the Programming Code
- 7.9.6 Changing the Normal/Secure Code
- 7.9.7 Changing the Normal/Bypass Code and Door Chime Settings
- 7.9.8 Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike Release Time
- 7.9.9 Defining the Auxiliary Input and Output
- 7.9.10 Auxiliary Mode Reference Guide
- 7.9.11 Setting the Lockout Feature
- 7.9.12 Setting the Backlight Behavior
- 7.9.13 Setting the Bell Button (*) Behavior
- 7.9.14 Enrolling Primary and Secondary Codes
- 7.9.15 Deleting Primary and Secondary Codes
- 7.9.16 Relay Codes Assignment
- 7.9.17 Relay Code Assignment using Standard Method
- 7.9.18 Relay Code Assignment using Search Method
- 7.9.19 PIN Code Length/Factory Default Settings
- 7.9.20 Replacing a Lost Programming Code
- 7.9.21 Exiting Secure Mode if Normal/Secure Code was Lost
- A. Declaration of Conformity
- B. Limited Warranty
Table of Contents
iv AYC-x6355 (Rev. A) Installation and User Manual
7.1 Normal, Secure, and Master Users .......................................... 36
7.2 Modes of Operation .............................................................. 37
7.2.1 Normal Mode ............................................................................... 37
7.2.2 Bypass Mode ................................................................................ 37
7.2.3 Secure Mode ................................................................................ 38
7.2.4 Changing the Modes of Operation ............................................... 38
7.3 Auxiliary Input and Output..................................................... 39
7.4 Door Alarms ......................................................................... 39
7.5 Internal Case and Back Tamper .............................................. 40
7.6 Lockout Feature (Keypad/Card Tamper) .................................. 40
7.7 REX Function ........................................................................ 40
7.8 Secured Intelligent Power Supply ........................................... 41
7.9 Programming as a Controller ................................................. 41
7.9.1 Entering Programming Mode ........................................................ 43
7.9.2 Exiting Programming Mode .......................................................... 43
7.9.3 Changing Lock Strike Code .......................................................... 44
7.9.4 Changing Auxiliary Code .............................................................. 45
7.9.5 Changing the Programming Code ................................................ 46
7.9.6 Changing the Normal/Secure Code .............................................. 46
7.9.7 Changing the Normal/Bypass Code and Door Chime Settings ...... 47
7.9.8 Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike
Release Time ................................................................................. 48
7.9.9 Defining the Auxiliary Input and Output ....................................... 49
7.9.10 Auxiliary Mode Reference Guide ................................................... 50
7.9.11 Setting the Lockout Feature .......................................................... 53
7.9.12 Setting the Backlight Behavior ...................................................... 54
7.9.13 Setting the Bell Button (*) Behavior .............................................. 54
7.9.14 Enrolling Primary and Secondary Codes ........................................ 55