User's Manual
Table Of Contents
- 1. General Information
- 2. Technical Specifications
- 3. Installation
- 4. Wiring Instructions
- 5. Reader Functionality
- 5.1 Transmit Mode
- 5.2 Programming the AYC- F/G/M60 Series
- Programming Menu
- Entering Programming Mode
- Exiting Programming Mode
- Selecting Keypad Transmission Format
- Keypad Transmission Format Option Number
- Option 1: Single Key, 6-Bit Wiegand (Rosslare Format)
- Option 2: Single Key, 6-Bit Wiegand Nibble and Parities
- Option 3: Single Key, 8-Bit Wiegand Nibbles Complemented
- Option 4: 4 Keys Binary + Facility Code, 26-Bit Wiegand
- Option 5: 1 to 5 Keys + Facility Code, 26-Bit Wiegand
- Option 6: 6 Keys BCD and parity bits, 26-Bit Wiegand
- Option 7: Single Key, 3x4 Matrix Keypad (MD-P64)
- Option 8: 1 to 8 Keys BCD, Clock & Data
- Option 9: Single Key, 4-bit Wiegand
- Selecting Proximity Card Transmission Format
- Changing the Programming Code
- Changing the Facility Code
- Setting the Backlight and Reader Format
- Return to Factory Default Settings
- Replacing a Lost Programming Code
- 6. Controller Functionality
- 6.1 Normal, Secure, and Master Users
- 6.2 Modes of Operation
- 6.3 Auxiliary Input & Output
- 6.4 Door Alarms
- 6.5 Internal Case and Back Tamper
- 6.6 Lockout Feature (Keypad / Card Tamper)
- 6.7 Request to Exit (REX) Function
- 6.8 Secure Application Appurtenances
- 6.9 Programming the AYC- F/G/M60
- Programming Menu
- Entering Programming Mode
- Exiting Programming Mode
- Changing Lock Strike Code
- Changing Auxiliary Code
- Changing the Programming Code
- Changing the Normal / Secure Code
- Changing the Normal / Bypass Code and Door Chime Settings
- Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike Release Time
- Defining the Auxiliary Input and Output
- Quick Reference Guide for Auxiliary Mode Setting
- Detailed Reference Guide
- Setting the Lockout Feature
- Setting the backlight behavior
- Enrolling Primary and Secondary Codes
- Deleting Primary and Secondary Codes
- Relay Codes Assignment
- Relay Code Assignment using Search Method
- Pin Code Length / Factory Default Settings
- Replacing a Lost Programming Code
- Replacing a Lost Normal / Secure Code
4) ystem returns to Normal
ill hear three beeps.
S
Mode/Transmit
Door/Program
Green
mode.
• You w
Note:
• Lock Strike Code does not work in the Secure Mode.
• Wrong entries will return the controller to Normal Mode.
• Code 0000 will erase the Lock Strike Code.
• The factory Default 4-digit Lock Strike code is 2580.
Auxiliary Code
used as a method to quickly test the
controller, the default Auxiliary
of
mode.
The Mode LED will turn
w code you
Code.
4)
Changing
The Auxiliary Code is mainly
Auxiliary Relay during installation.
When the first user is added to the
Code will automatically be deleted. Once the code is
programmed again, it will not be deleted with the entry
additional User Codes.
1) Enter Programming
AYC-Qx4 family manual Page 36
2) Press “2” to enter Menu 2.
•
orange.
3) Enter the ne
wish to set as the auxiliary
System returns to Normal mode.
• You will hear three
beeps.
Note:
• Auxiliary code does not work in the Secure Mode.
• Wrong entries will return the controller to Normal Mode.
• Code 0000 will erase the Auxiliary Code.
• The factory Default 4-digit Auxiliary Code is 0852.
2
? ? ? ?
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Oran
g
e
Green
e/Transmit
Door/Program
Green
Mod