User's Manual

Installation
Figure 2: Removing the Top Cover
Figure 2 shows the front view of the AY-Z12 Long-Range Reader.
When installing the reader, you must remove the snap-off cover to
access the screw holes.
The Reader must be mounted with the appropriate screws (not
supplied), as described in the template provided.
Installing the unit on metal surfaces will reduce the read range
considerably, to decrease the affect of the metal surface use
Rosslare’s MP-Z02 Spacer (sold separately) as described in the
image below for a max range of 43cm (17 inch).
Figure 3: Installing the unit with the MP-Z02 spacer
Page 7 AY-Z12 Installation Manual