Operator`s manual

Video Characteristics
Video Processing
• 10 bit 4:2:2 component digital video and key processing
• The following video formats are supported:
1080i/59.94 SMPTE-274M, SMPTE-292M
720p/59.94 SMPTE-296M, SMPTE-292M
1080i/50 SMPTE-274M, SMPTE-292M
480i/59.94 (SD 525) SMPTE-125M, SMPTE-259M
570i/50 (SD 625) ITU-R BT.601-5, SMPTE-259M
• Contact Ross Video as additional format compatibility is planned
• 4:3 and anamorphic 16:9 switchable aspect ratio where applicable
Video Inputs
Number of external inputs 16, 32, 48, 64, 80, or 96
Equalization
(using Belden 1694 cable)
> 75m @ 1.5Gb/s
> 150m @ 270Mb/s
Impedance 75 ohm, terminating
Return loss > 20 dB @ 1.5GHz
• All inputs are SMPTE-259M/292M serial digital non-looping.
• The Synergy 4 MD-X comes standard with 16 inputs and additional inputs are
purchased in groups of 16.
• Inputs can be used for either key or video.
• The reference input is selectable, analog black for Standard Definition operation, and
tri-level sync is recommended for High Definition operation.
• The reference input is a looping, non-terminated input.
Video Outputs
Number of Outputs:
Number of video outputs: 16, 32, or 48
• The Synergy 4 MD-X comes standard with 16 outputs and additional outputs are
purchased in groups of 16.
Page 41 of 48 March 2005 Synergy 4 MD-X Ordering Guide, v3