Operator`s manual

RGB Color Correctors S4MDX-013
Up to four floating input-based RGB Color Correctors can be added to the Synergy 4 MD-
X. Each one can modify any one of the 96 possible inputs as seen by the MLEs.
This feature is particularly useful for correcting lighting temperature variations and
differences in camera calibration, or for adding creative effects.
Note that color correction does not apply to Aux Buses, or to DSK3 or DSK4, if
purchased.
Panel Serial Port Expander S4MDX-015
(Adds 3 RS-422 Ports)
This option connects to any one of the control panel serial ports, and provides four serial
port outputs, effectively increasing the number of available panel ports by three. This is a
"smart" port expander and works with the Synergy control panel to seamlessly manage
external device traffic.
Each Panel Serial Port Expander allows up to four different device types to be
simultaneously connected and independently controlled by Synergy. Note that you cannot
control a 360 Systems DigiCart audio server using this option.
Multiple Port Expander units may be connected to a Synergy 4 MD-X control panel at one
time.
The unit is about 4 inches by 6 inches and is designed to easily mount under the console
near the Synergy 4 MD-X control panel.
SD Network Still & Clip Server Option S4MDX-016-x
(4 Models)
Note: This option is available in Standard Definition only.
This option adds a fully integrated Still and Clip Server to the system. The –x portion of
the part number represents the model of the server that you require.
The following models are available:
Option
Number
Description of Network Still and Clip
Server
S4MDX-016-N
48 hours of clip storage at 12 Mb/s MPEG-2
compression for NTSC standard
S4MDX-016-P
48 hours of clip storage at 12 Mb/s MPEG-2
compression for PAL standard
S4MDX-016-250-N
100 hours of clip storage at 12 Mb/s MPEG-2
compression for NTSC standard
Page 18 of 48 March 2005 Synergy 4 MD-X Ordering Guide, v3