User manual

5–2 • Card-edge Menus MUX-6258-A Series User Manual (Iss. 04)
Navigating the Card-edge Menus
Use the following procedure to navigate the card-edge menus of the card:
1. Locate SW1 and SW2 on the front card-edge. Refer to Figure 3.1 on page 3-2 for
switch locations.
2. Rotate SW1 to the required menu.
3. Toggle SW2 to select the required parameter.
Note — Do not power down the card before ensuring that all edited parameters are
saved. Saving edited parameters can take up to 10 seconds.