User manual

4–10 • DashBoard Menus MUX-6258-A Series User Manual (Iss. 04)
Alarm Enables Tab
Table 4.8 summarizes the Alarm Enables options available in DashBoard.
Table 4.8 Alarms Menu Items
Menu Title Item Parameters Description
Video Input &
Reference
Alarm
No Input
Selected* Signal Status field reports a loss of input
Cleared Disables the alarm
Invalid Input
Selected*
Input Format field displays an alarm when
the input video is a format that is not
supported
Cleared Disables the alarm
Incompatible Input
Selected*
Input Format field reports when the video
frame rate is not the same as the reference
input
Cleared Disables the alarm
Non-Sync Video
Selected*
Signal Status field reports if the video
input is asynchronous to the reference
Cleared Disables the alarm
No Reference
Selected*
Reference Status field reports loss of input
conditions
Cleared Disables the alarm
Invalid Reference
Selected*
Reference Format field reports when the
reference is a format that is not supported
Cleared Disables the alarm
Hardware
Incompat Rear Module
Selected*
HW Status field reports when a rear
module is not compatible with the card
Cleared Disables the alarm
Optical Module
Alarms
Alarm on Abnormal
Temperature
Selected*
HW Status field reports when the
temperature of the SFP module is not in
range (high/low)
Cleared Disables the alarm
Alarm on Abnormal
Power
Selected*
HW Status field reports when the power
consumption of the SFP module is not in
range (high/low)
Cleared Disables the alarm
Alarm on Not Detected
Selected*
HW Status field reports when the optical
module is not detected
Cleared Disables the alarm