Specifications
Key Features
Ordering Information
p.87
Fiber
Call Ross Video for details at +1 (613) 652-4886.
MUX / DEMUX Features
• Passive DWDM optical MUX and DEMUX modules
contain no active components and offer very
high reliability
• Optical output connection: LC / UPC
• Supports single-mode ber
• 40 and 80 channel congurations (40 L Band +
40 C Band)
• High density, 1RU chassis supports up to 40 channels
• 5-year transferable warranty
Transmitter Features
• Optical to Electrical for all SMPTE 424M, SMPTE
292M and SMPTE 259M-C standards
• Future-proofed 3Gb/s (1080p) design
• Supports single-mode ber
• Hot-swappable from front of frame with no external
connect / reconnect required
• 80 supported DWDM wavelengths across L and C
bands
• Optical output power 0dBm
• Optical output connection: LC / UPC
• DashBoard alarming for signal presence and
optical faults
• Fits into the DFR-8321 openGear
®
frame
• 5-year transferable warranty
DWDM Optical MUX / DEMUX
A 1RU chassis provides optical multiplexing for up to 40 wavelengths in either the L or C band spectrums.
An expansion port provides multiplexing of the L and C bands to output a total of 80 channels on a single
ber. Wavelength MUX / DEMUX modules use passive wavelength lters. With no active components,
modules offer a very high level of reliability.
DWDM Transmitters and Receivers
Wave division multiplexing allows the use of multiple wavelengths of light on a single ber, therefore allowing
a single ber to carry multiple signals. Each signal can run at its own bit rate and protocol, independent for
the other signals.
Each electrical signal to be multiplexed into the nal output must be converted to an optical signal with a
unique wavelength by using different lasers on the transmitter. The FST-6602, single electrical to optical
transmitter comes in 80 product variants with each card transmitting unique wavelengths. The products are
identied by a three digit sufx, which identies the wavelength’s frequency.
Optical to Electrical converters use a wide spectrum optical receiver and will work with any wavelength. Both
the FSR-6601 single and the FDR-6603 Dual Optical to Electrical converters are wide spectrum receivers and
will function within the DWDM system, regardless of the transmitted wavelengths.