Specifications

Ordering Information
Key Features
FIBER IN 1
FIBER IN 2
56
78
910
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
CARD 2CARD 1
FIBER IN A FIBER IN A
FIBER IN B FIBER IN B
56
78
910
SDI OUT A1
SDI OUT A2
SDI OUT B
SDI OUT A1
SDI OUT A2
SDI OUT B
3G / HD / SD
SDI OUT
3G / HD / SD
SDI OUT*
3G / HD / SD
SDI OUT
3G / HD / SD
SDI OUT*
3G / HD / SD
SDI OUT
3G / HD / SD
SDI OUT*
3G / HD / SD SDI
FIBER IN A
OPTICAL TO
ELECTRICAL
CONVERTER
RECLOCKER
DRIVERDRIVERDRIVER
BUFFER
3G / HD / SD SDI
FIBER IN B
OPTICAL TO
ELECTRICAL
CONVERTER
RECLOCKER
BUFFER
* Only 2 outputs for channel A and 1
output for channel B are available
when using the -R2S rear module.
Fiber
p.75
FDR-6603-R2 FDR-6603-R2S
Dual Optical to Electrical Converter
FDR-6603 Dual Optical Receiver
Rear Module Sufx (ex: [model]-R2)
-R2 Rear Module for FDR-6603
-R2S Split Rear Module for 2x FDR-6603
• Optical to Electrical for all SMPTE 424M, SMPTE 259M-C,
SMPTE 292M standards
• Future-proofed 3Gb/s (1080p) design
• Supports single-mode ber
• Hot-swappable from front of frame with no external
connect / reconnect required
• Optical input range 1270nm to 1610nm
• Optical input sensitivity -18dBm
• Optical input connection: LC / UPC
• Reclocked SDI outputs
• Reclocking on all outputs at 270Mb/s, 1.483Gb/s,
1.485Gb/s, 2.967Gb/s, 2.970Gb/s
• Alarming for signal presence and input sensitivity
• 5-year transferable warranty
• Power: 5.5 watts
Dual Optical to Electrical Converter
Future-proofed optical products with 2 channels of conversion on a single card supporting data rates
from 143Mb/s to 3Gb/s (1080p).
The FDR-6603 is a dual ber optic receiver to serial digital
SDI converter providing 2 channels of conversion on a single
card supporting serial digital data rates from 143Mb/s up
to 2.97Gb/s (1080p). SDI outputs are reclocked providing
excellent jitter and return loss specications.
The FDR-6603 is fully hot-swappable with all active
components on the front removable module. No active
components are installed on the rear I/O connection module.
This design greatly reduces down-time eliminating any need to
access the back of the rack frame.
The -R2S high density split rear module can accommodate up
to 2x FDR-6603 cards, maximizing the number of conversion
channels in a frame. In this conguration, the DFR-8321
supports up to 40 independent channel solutions, providing
ultra-high density conversion in a 2RU space.
FDR-6603
HD
SD
3G