Specifications

Ordering Information
Key Features
p.24
QSP-8229-R2L
Distribution and Monitoring
Quad Split
QSP-8229 Quad Split
Rear Module Sufx (ex: [model]-R2)
-R2 Rear Module for QSP-8229
-R2L Looping Rear Module for QSP-8229
• Quad image processor
• 4 passive looping inputs available with the -R2L
looping rear module
• 4 congurable outputs, pass-through / quad split
• Source ID labeling
• Quadrant bordering with adjustable width, color and
transparency
• Any quadrant can be taken full screen
• <1 frame of processing delay
• Independent proc amp control on each output
• Auto-detection of HD / SD input
• Local GPI control
• 5-year transferable warranty
• Power: 18.4 watts
Quad Split
A cost-effective, single card solution for viewing up to 4 inputs on a single display.
The QSP-8229 is a very cost-effective solution for monitoring
up to 4 video inputs. The 4 video inputs are combined into a
single quad split output with congurable UMD and bordering
capability. In addition to the 4 inputs, the QSP-8229 offers 4
independent outputs that can be congured to display either
the combined quad output or pass-through of the input, with
full proc control, offering additional outputs for use elsewhere.
Unique to the quad processor is passive looping inputs
allowing the card to t into any video path without the need
for additional DAs. Looping is performed on the back module
ensuring the signal path is not lost even when the processor
is removed.
DashBoard control allows each quadrant to optionally display a
static source ID and / or borders with fully adjustable color and
transparency. Each output can be triggered to display the quad
split or full screen with local GPI control or remote DashBoard
control. This feature is extremely useful when a full screen
image is desired to verify video quality.
PROC
AMP
SERIALIZER
DESERIALIZER
FRAME SYNC/
VIDEO SCALER
4:1
DESERIALIZER
FRAME SYNC/
VIDEO SCALER
4:1
DESERIALIZER
FRAME SYNC/
VIDEO SCALER
4:1
DESERIALIZER
FRAME SYNC/
VIDEO SCALER
4:1
SDI OUT 1
(BNC 9)
BKGD A SDI IN
(BNC 5)
BKGD A LOOP
(BNC 6)
BKGD B SDI IN
(BNC 1)
BKGD B LOOP
(BNC 2)
BKGD C SDI IN
(BNC 4)
BKGD C LOOP
(BNC 3)
BKGD D SDI IN
(BNC 8)
LOCAL REF
(BNC 11)
BKGD D LOOP
(BNC 7)
QUAD DISPLAY CONTROLLER
CROSSPOINT
LINE SYNC
LINE SYNC
LINE SYNC
LINE SYNC
DRIVER
PROC
AMP
SERIALIZER
SDI OUT 2
(BNC 10)
DRIVER
PROC
AMP
SERIALIZER
SDI OUT 3
(BNC 12)
DRIVER
PROC
AMP
SERIALIZER
SDI OUT 4
(BNC 13)
DRIVER
FRAME REF 1
FRAME REF 2
VIDEO
OUTPUT
TIMING
GENERATOR
CARD
CONTROL
LOCAL AREA
NETWORK
SERIAL PORT
8 GPI INPUTS
Only 4 analog inputs are available
when using the -R2L split rear module.
*
QSP-8229
3D
3G
HD
SD
BKGD B IN
BKGD A IN
BKGD A LOOP
OUT 1
OUT 3
REF IN
GPI 1, 2
BKGD C IN
BKGD C
LOOP
BKGD B
LOOP
BKGD D IN
BKGD D LOOP
OUT 2
SERIAL
COM PORT
OUT 4
ETHERNET
PORT
GPI
1, 2
GPI
5, 6
GPI
7, 8