Specifications

Ordering Information
Key Features
p.22
UDA-8705A-R2L UDA-8705A-R2S
Distribution and Monitoring
Analog Utility Distribution Amplier
UDA-8705A Analog Utility DA
Rear Module Sufx (ex: [model]-R2)
-R2 Rear Module for UDA-8705A
-R2L Looping Rear Module for UDA-8705A
-R2S Split Rear Module for 2x UDA-8705A
• 1x4 or analog distribution amplier
• DC coupled
• Wide adjustable gain range of ±3dB
• Low distortion
• Excellent isolation between outputs
• Power to each card is individually fused
• 20 DAs in DFR-8321
• 5-year transferable warranty
• Power: 1.5 watts
Analog Utility Distribution Amplier
A very useful device in HD / SD digital systems where there is a requirement for analog
signal distribution.
The UDA-8705A is an analog general purpose distribution
amplier in the openGear
®
platform. Use of this amplier will
avoid the need to purchase a separate analog frame and power
supply in digital installations.
This amplier may be used in any application where
equalization and a differential input is not required - an
excellent device for composite and tri-level sync distribution.
The use of new generation integrated circuits and innovative
engineering has resulted in excellent performance combined
with economy.
The -R2S high density split rear module can accommodate
up to 2x UDA-8705A cards, each congured as a 1x4 DA. The
-R2L offers a 1x8 DA with a passive looping input.
GAIN
±3dB
BNC 3
BNC 2**
BNC 1
BNC 4
BNC 5
BNC 6
BNC 7*
BNC 8*
BNC 9*
BNC 10*
+
-
TERM
JP1LOOP
M
J
P
ANLG
Only 4 analog outputs are available
when using the -R2S split rear module.
Looping input available with -R2L
rear module.
**
*
UDA-8705A
AN-VID
ANLG
LOOP
1
K
2
34
56
78
910
ANLG
IN
ANLG
OUT
ANLG
OUT
ANLG
OUT
ANLG
OUT
ANLG
OUT
ANLG
OUT
ANLG
OUT
ANLG
OUT
CARD 2CARD 1
ANLG
2 IN
ANLG
1 IN
ANLG
2 OUT
ANLG
2 OUT
ANLG
2 OUT
ANLG
2 OUT
ANLG
1 OUT
ANLG
1 OUT
ANLG
1 OUT
ANLG
1 OUT
1
A
2
34
56
78
910