Specifications

Ordering Information
Key Features
p.113
TSI-100-R2D
Transport Stream Monitoring and Conversion
Transport Stream Identier
TSI-100 Transport Stream Identier
Rear Module Sufx (ex: [model]-R2)
-R2D Rear Module w/ Dry Contact Relays
for TSI-100
Transport Stream Identier
Monitor and signal a remote device when an incorrect transport stream or no transport stream
is present.
The TSI-100 monitors the ASI transport stream and provides a
GPI/O output when the TSID is not correct. This signal may be
used to control other devices or to signal the fault.
The TSI-100 is ideally suited for use in remote television
broadcast translators to mute or power off the re-transmitter
when the main broadcast goes off the air. It may also be used in
a cable head-end for the same purpose.
• Verify transport stream is correct by inspecting its TSID
• GPI/O output to signal a problem or control
another device
• Ideal for muting translators when main transmitter
is off air
• Connection for both normally open and normally closed
operation
The TSI-100 provides remote control of:
• Transmitters in a translator
• Cable head-end channel input equipment
• Signals a remote device or alarm when an incorrect
transport stream or no transport stream is present
• Simple setup, enter the TSID of the transport stream
• 2 GPI/Os provide both normally open and normally
closed signaling
• Unattended operation, set it and forget it
• 5-year transferable warranty
VIDEO
DAC
OSD
SERIALIZE*
EQUALIZE /
DESERIALIZE
SERIALIZE
ASI OUT
OSD SD SDI OUT
OSD SD ANLG OUT
ASI IN
GPI/Os
ANALYZE
TS
CPU
BYPASS*
RELAYS*
*Dry Contact Relays available only with
standard -R2D rear module, video
bypass relay is only available with optional
MDL-R20 rear module (purchase seperately).
ASI IN
12
NOT
USED
ASI OUT
34
ANLG OSD
OUT
GPI/OsGPI/Os
TSI-100
ASI
p.113