Specifications

Ordering Information
Rear Module Basics
Ordering Information
Rear Module Basics
p.11
-R2 and -R2S (High Density) I/O Available
Select openGear
®
cards support standard and high density rear I/O modules:
The -R2 rear module occupies 2 slots in the DFR-8321 platform and supports 1
openGear
®
card. The -R2 rear module is used for solutions that require access
to the full I/O connections.
The -R2S rear module occupies 2 slots in the DFR-8321 platform and supports
2 openGear
®
cards. The -R2S rear module is used for solutions that require less
I/O connections.
SRA-8601A-R2S
In this conguration, the rear module (-R2S) is designed with 2 openGear
®
card
connections and offers 5 BNCs to each openGear
®
card. This allows the
SRA-8601 to operate as a 1x4 DA with up to 20
independent solutions in a single frame.
SRA-8601A-R2
In this conguration, the rear module (-R2) is designed with 1 openGear
®
card
connection and offers 10 BNCs to the openGear
®
card allowing the operation as
a 1x8 DA with up to 10 solutions in a single frame.
EXAMPLE - Distribution Ampliers:
The SRA-8601A openGear
®
card is designed as a 1x8 DA.
SRA-8601A-R2
SRA-8601A-R2S