Specifications

Ordering Information
Key Features
p.102
CDP-100-R2
Data Solutions
VANC Captioning CDP Analyzer
CDP-100 CDP Analyzer
Rear Module Sufx (ex: [model]-R2)
-R2 Rear Module for CDP-100
VANC Captioning CDP Analyzer
Monitor caption distribution packets for compliance and prevent caption errors within VANC.
• Use at media ingest to help reject poorly
captioned content
• Catching subtle caption errors before they cause
problems further down the broadcast chain
• Isolating issues with broadcast equipment and
providing a detailed analysis which can be passed
on to the manufacturer
• Used by manufacturers to provide compliance with the
captioning standards
• 5-year transferable warranty
The CDP-100 monitors captioning CDPs in a SMPTE 292 signal
for compliance to the SMPTE 334 standard. It reports and logs
any variances from the standard.
The card can either run continuously and log errors or stop
when it encounters an error. When stopping on an error it can
stop immediately or it can stop so that the capture buffer is
centered on the error. The product keeps track of when errors
occur. Errors can be set to be handled as errors, as warning or
to be ignored.
Monitoring can be done as an overlay on the video and / or
through the DashBoard interface.
In DashBoard there are controls for running, stopping and
clearing errors. There is a log of all errors and the time when
each occurred. There is an upload facility to allow the captured
CDPs to be moved to a PC for further analysis.
HD - SDI
IN
12
3
45
HD - SDI
OUT 1
HD - SDI
MON OUT
GPI/Os
LTC IN
HD - SDI
OUT 2
EQUALIZE /
DESERIALIZE
ANALYZE
VANC
SERIALIZE
SERIALIZE
HD SDI OUT 2
HD SDI OUT 1
LTC IN
HD - SDI IN
GPI/Os
CPU
MUX
OSD
HD / SD SDI
MON OUT
BYPASS
CDP-100
HD
SD
AFD