Fiber

Ordering Information
Key Features
CARD
CONTROL &
MONITORING
10 / 100 / 1000
ETHERNET
SWITCH
FIBER BI-DIR B
ETHERNET PORT 3
ETHERNET PORT 2
ETHERNET PORT 1
OPTICAL
MODULE
FIBER BI-DIR C
OPTICAL
MODULE
OPTICAL
MODULE
FIBER OUT A
FIBER IN A
INTERNAL LINK
(GigE Connection to
OG3-FR Midplane)
ETHERNET
PORT 3
FIBER IN A
FIBER OUT A
FIBER BI-DIR B
FIBER BI-DIR C
ETHERNET
PORT 2
ETHERNET
PORT 1
 FET-6946-R2
FET-6946
TripleLinkEthernetTransceiver,DualBi-Directionalplus
DualFiber
FET-6946-20A 20km WDM 1310 TX / 1550 RX
FET-6946-20B 20km WDM 1550 TX / 1310 RX
FET-6946-40A 40km WDM 1310 TX / 1550 RX
FET-6946-40B 40km WDM 1550 TX / 1310 RX
RearModuleSufx(ex:[model]-R2)
-R2 Rear Module for FET-6946
• 3 independent copper Gigabit Ethernet ports
• Copper Ethernet connection: RJ45
• Quad ber connection
• Optical connection: LC
• Internal GigE midplane connection
• SNMP compliant
• 5-year transferable warranty
InputOpticalSensitivity&Wavelength
• 20km A: -22dBm @ 1550nm
• 20km B: -23dBm @ 1310nm
• 40km A: -23dBm @ 1550nm
• 40km B: -23dBm @ 1310nm
OutputPower&Wavelength
• 20km A: -8dBm @ 1310nm
• 20km B: -8dBm @ 1550nm
• 40km A: -3dBm @ 1310nm
• 40km B: -5dBm @ 1550nm
The FET-6946 is a dedicated 7 port, Gigabit Ethernet switch.
3 copper ports provide 1Gb/s connectivity for multiple Ethernet
enabled devices or links to additional network switches.
2 optical ports provide 2 Ethernet links over two, bi-directional
ber connections and 2 additional optical ports provide a 3rd
Ethernet link over dual ber connections. An additional port is
available for the OG3 frame’s optional internal GigE controller.
The FET-6946 is available in 2 varieties: The FET-6946-20A/B
transceiver pair is capable of running up to a 20km link between
2 transceivers. The FET-6946-40A/B transceiver pair is capable
of running up to 40km link, by using a higher output power and
higher receiver sensitivity SFP.
Using WDM (Wave Division Multiplexing), a bi-directional link
can be obtained using 1310nm and 1550nm wavelengths over
a single ber link. When using WDM single ber link, the two
FET-6946 transceivers at each end of the link must complement
each other in regards to their wavelength TX and RX.
Fiber | openGear p.93
Triple Link Ethernet Fiber Transceiver (WDM & Dual Fiber)
7 Port, Gigabit Ethernet switch with triple link, dual bi-directional plus dual ber transceivers.
GigE