Operator`s manual

CrossOver 6 / 12 User Manual (v4.0) Specifications • 8–5
3D Position Y — 0x24 Not supported
3D Position Z — 0x25 Not supported
3D Border Softness — 0x26 Not supported
3D Border Width — 0x27 Not supported
Key Clip Keyer 0x08 DSKs
Key Gain Keyer 0x09 DSKs
Table 8.5 GVG100 Supported Lamps
Name MLE/Keyer Byte Code Notes
Program Bus 0-9 MLE 0x00-0x09 Turning OFF results in a protocol error.
Program Bus On Air MLE 0x0A Turning OFF results in a protocol error.
Autotrans MLE 0x0B
Key Dissolve Keyer 0x0C
Key Cut Keyer 0x0D
Wipe Trans MLE 0x0E
Dissolve Trans MLE 0x0F
Preset Bus 0-9 MLE 0x10-0x19 Turning OFF results in a protocol error.
Preset Bus On Air MLE 0x1A Turning OFF results in a protocol error.
Aspect On
MLE 0x1B Always on. Turning OFF results in a
protocol error.
Positioner On
MLE 0x1C Always on. Turning OFF results in a
protocol error.
Reverse Wipe MLE 0x1D
Dsk Preview
Keyer 0x1E Always true. All Keyers show on
Preview Turning OFF results in a
protocol error.
Fade To Black — 0x1F
Key Bus 0-9 Keyer 0x20-0x29 Turning OFF results in a protocol error.
Key Bus On Air Keyer 0x2A Turning OFF results in a protocol error.
Key Video Fill
Keyer 0x2F Always true. Turning OFF results in a
protocol error.
Wipe Type MLE 0x30-0x39 Turning OFF results in a protocol error.
Key Invert
Keyer 0x40 DSKs. Turning OFF results in a protocol
error.
Key Mask
Keyer 0x41 DSKs. Turning OFF results in a protocol
error.
Key Autokey
Keyer 0x42 DSKs. Turning OFF results in a protocol
error.
Key Selfkey
Keyer 0x43 DSKs. Turning OFF results in a protocol
error.
Table 8.4 GVG100 Supported Analog Controls
Name MLE/Keyer Byte Code Notes