Operator`s manual

2–14 • Configuration CrossOver 6 / 12 User Manual (v4.0)
To configure the NEXT button secondary
function:
1. Press MENU.
2. Press the PERS Wipe Pattern button.
3. Press NEXT until NextBn Func2 is
displayed.
4. Press the NextBn Func2 knob to display
the Secondary Function menu.
5. Use the Func knob to select the secondary
function for the NEXT button. You can
choose from the following:
• None — The NEXT button is not
assigned a secondary function.
• GPO — The NEXT button (in
combination with the Wipe Pattern buttons) is
used to trigger GPI outputs.
6. If you selected GPO in the previous step, use
the Bank knob to select which GPI output
bank you wish to control.
Note:
• Only one GPI output bank can be triggered at a
time.
For More Information on...
• GPI usage and configuration, refer to the section
“General Purpose Interface (GPI)” on page 4-14.
Background Double-Press
The Background Double-Press feature allows you to
have a double-press of the BKGD button on a
Transition Module select background and all on-air
keyers as part of the next transition.
To configure the BKGD Double-press behavior:
1. Press MENU.
2. Press the PERS Wipe Pattern button.
3. Press NEXT until Trans Area is displayed.
4. Press the Trans Area knob.
5. Press NEXT.
6. Use the BGDDbl knob to set the behavior of
the Background button when it is
double-pressed.
• Ignore — Select this option to not include
the on-air keyers with the next transition
when the BKGD button is double-pressed.
• TrsClr — Select this option to include all
on-air keyers with the next transition when
the BKGD button is double-pressed.
MENU
NEXT
NEXT
NEXT
NEXT
MENU
NEXT
NEXT