Operator`s manual

CrossOver 6 / 12 User Manual (v4.0) Configuration • 2–9
6. Press the Edit knob.
7. Use the IPMode knob to select DHCP.
8. Press the IPMode knob to save your
selection.
9. Press the Reboot knob to commit the
change and reboot the switcher. Press the
Cancel knob to discard the change and return to
the previous setting.
To configure a static IP address for your switcher:
1. Ensure your switcher is connected to your
network via the ethernet port.
2. Press MENU.
3. Press the SYSTEM Wipe Pattern button.
4. Press NEXT until IP Addr is displayed.
5. Press the IP Addr knob to display the IP
Address menu.
6. Press the Edit knob.
7. Use the IPMode knob to select Static.
8. Press NEXT until IPAddr is displayed.
9. Use the left knob to select the data to
configure. You can choose from the following:
• IPAddr — Configure the IP address
(configure this first).
• Mask — Configure the network mask.
• Gatwy — Configure the default gateway.
10. Use the Field knob to select the fields in the
address.
11. Use the Value knob to modify the field
value.
12. Repeat steps 9 to 11 for Mask (network mask),
and Gatwy (network gateway).
13. Press the left knob to save all network
settings.
14. Press the Confrm knob or the Reboot
knob to commit the changes. Press the
Cancel knob to discard the changes and return
to the previous setting.
Note:
• If you are switching from DHCP to static IP mode,
a reboot is required.
Bus Map
You can re-map the source buttons on your switcher
if you wish to customize the order of inputs and
Media-Store channels on each bus row. Each source
button can have two inputs assigned (a standard input
and a shifted input).
Each bus row shares the same button mapping.
To modify the Bus Map:
1. Press MENU.
2. Press the CONFIG Wipe Pattern button.
3. Press the BusMap knob to display the Bus
Map menu.
4. Use the XptBtn knob to select the source
button to modify.
5. Use the Input knob to select the desired
input source or Media Store channel. Select
Shift if you wish this button to be a Shift
button.
6. Use the Shift knob to select the desired
input source or Media Store channel assigned to
the shifted state of the selected source button.
Switcher Personality
The switcher has customizable features that allow
you to tailor operation to your personal preferences.
Customizing the Panel Glow
Panel buttons are set to a glow color which is used
when the button is not selected. This glow color can
be customized.
To customize the Panel Glow color:
1. Press MENU.
2. Press the USER Wipe Pattern button.
3. Press the Scheme knob to display the
Color Scheme menu.
4. Use the HUE knob to adjust the Panel Glow
hue.
MENU
NEXT
NEXT
MENU
MENU