Product manual

Switcher Soft Reset
If required, the switcher can be reset to return it to a
user-defined default setting, or the factory default state.
A reset can be performed the entire switcher, or
individual components, such as keys.
Soft Reset
The software reset returns the switcher to the default
state. Black is selected on all buses, all keys are cut
off-air, and the transition rate is set back to default. This
is useful if you need to return the switcher to a known
state.
To Reset the Switcher Software
1.
Press and hold MENU.
2.
Press Reset All (RESET on the Carbonite 1).
Custom Reset Settings
You can customize many of the default switcher
parameters and save them as a user-defined reset settings.
These custom reset settings can then be recalled when
you want to return the switcher to a previous state.
To Save a Custom Reset Setting
You can customize many of the default switcher
parameters and save them as a user-defined custom reset.
1.
Press MENU > RESET > NEXT.
2.
Use the Attrib knob to select Media.
3.
Use the Media knob to select Media1.
4.
Use the Value knob to select whether the
Media-Store channel is reset with a switcher reset
or not.
•
NoRst — the Media-Store channel is not
reset
•
Reset — the Media-Store channel is reset
with a switcher reset
Repeat this for the remaining Media-Store
channels.
5.
Use the Attrib knob to select Aux.
6.
Use the Aux knob to select Aux 1.
7.
Use the Value knob to select whether the Aux
bus is reset with a switcher reset or not.
•
NoRst — the Aux bus is not reset
•
Reset — the Aux bus is reset with a
switcher reset
Repeat this for the remaining Aux buses.
8.
Press NEXT > NEXT > NEXT.
9.
Press RState Save.
10.
Press Confrm to save the new reset settings.
To Load a Custom Reset Setting
1.
Press MENU RESET.
2.
Press RState Load.
You can also press and hold MENU and press
Reset All (RESET on the Carbonite 1).
Factory Default Settings
You can restore the switcher to the factory default state.
All installation and personality settings are reset.
To Factory Reset the Switcher
1.
Press MENU > RESET > NEXT > NEXT.
2.
Press the Factry Reset knob.
3.
Press the Confrm knob to load the factory
default settings.
Resetting Individual Components
You can reset only the component that you want, instead
of the entire switcher. Individual MLEs, keys, aux buses,
dissolves, wipes, and menu items can be reset.
Table 7: Resetting Individual Components
ResultButtons to PressTo Reset
all wipe parameters, including
position, pattern, and border, are
reset
WIPE and RESETWipes
all dissolve parameters are resetDISS and RESETDissolves
key parameters for key # including
clip, gain, and mask, are reset, but
KEY # SEL and
RESET
Keys
not key type, or chroma key color
selection (each keyer is reset
individually) (# is the number of the
key)
MLE # parameters, including source
selections, are reset (each MLE is
MLE # and RESET (C1
only)
MLEs
reset individually) (# is the number
of the MLE)
MLE # STORE and
MLE # RECALL (all
other panels)
Aux bus # parameters, including
source selections, are reset (each
AUX # and RESETAux Buses
Aux is reset individually) (# is the
number of the aux bus)
the value for that knob is resetdouble-press the knob
for the value you want
to reset
Menu
Items
Carbonite Operation Manual (v6.1) — Switcher Soft Reset • 47