Product manual

c)
Press Top/B and use the T/Bttm knob to
crop the DVE key vertically on the bottom
side only.
13.
Use the Freeze knob to freeze the DVE key.
You can freeze the video and appearance of a
DVE Key. When a DVE Key is frozen, the DVE
attribute menus are disabled and you can not
move the DVE Key or adjust DVE attributes.
14.
Use the Mask knob to apply a mask to the key.
To Apply a Border to a DVE Key
1.
Press DVE > NEXT
2.
Use the Border knob to turn on the border and
adjust the size of the border around the DVE key.
3.
Use the Soft knob to adjust the softness of the
border.
4.
Press NEXT.
5.
Select a color for the border.
•
Use the Load knob to select a preset color
for the border.
•
Press NEXT and use the BHue, BSat, and
BLum knobs to select your own color.
Masks
A Mask is a technique in which a pattern is combined
with the key source to block out unwanted portions of
the key source.
Two types of masks are available, Box masks and Pattern
masks. All key types can be masked.
• Box Mask — used a simple box shape to mask out
a portion of the key
• Pattern Mask — uses a pattern from the pattern
generator to mask out a portion of the key
A Pattern Mask cannot be applied to a DVE key.
To Pattern Mask a Key
Pattern masks can be adjusted for size, location, rotation,
and multiplication.
1.
Select the keyer that you want to set up a mask
for.
2.
Press NEXT. Depending on the key type and
features set up for the key, you must press NEXT
multiple times to get to the next step.
3.
Use the Mask knob to select Pattrn.
4.
Use the M-Frce knob to force the area inside
the mask region to the foreground (On).
5.
Use the M-Inv knob to invert the masked area
with the unmasked area (On). The portion of the
key that was masked out is now visible, and the
portion that was visible is masked.
6.
Press NEXT.
7.
Use the Size knob to adjust the size of the mask
region. You can also twist the positioner.
8.
Press NEXT.
9.
Use the Pattrn knob to select the mask pattern
you want to use.You can also select the pattern
by pressing the pattern button directly.
10.
Use the X Pos knob to position the mask
horizontally. You can also use the positioner.
11.
Use the Y Pos knob to position the mask
vertically. You can also use the positioner.
12.
Press NEXT.
13.
Use the Aspect knob to adjust the aspect ratio
of the pattern. Not all patterns can be adjusted.
14.
Use the Border knob to turn on the border and
adjust the size of the border.
15.
Use the Soft knob to adjust the softness of the
border.
16.
Press NEXT.
17.
Use the Rot knob to rotate the pattern. Not all
patterns can be rotated.
18.
Use the HMult knob to multiply the pattern
horizontally.
19.
Use the VMult knob to multiply the pattern
vertically.
To Box Mask a Key
Box masks can be adjusted for size, location, rotation,
and multiplication.
1.
Select the keyer that you want to set up a mask
for.
2.
Press NEXT. Depending on the key type and
features set up for the key, you must press NEXT
multiple times to get to the next step.
3.
Use the Mask knob to select Box.
4.
Use the M-Frce knob to force the area inside
the mask region to the foreground (On).
5.
Use the M-Inv knob to invert the masked area
with the unmasked area (On). The portion of the
30 • Keying — Carbonite Operation Manual (v6.1)