User manual

ADC-8733A User Manual (Iss. 02B) Menus • 4–7
Framing Menus
Table 4.6 summarizes the Framing Menu options available in DashBoard for the ADC-8733A.
Proc Amp Menus
Table 4.6 summarizes the Proc Amp Menu options available in DashBoard for the ADC-8733A.
Table 4.5 Framing Menu Items
Tab Title Item Parameters Description
Framing
Vertical Interval
Blanking
m
Pass Through Pass the vertical interval
Blank Blank the vertical interval
Vertical Interval End
m
19 to 21
a
a. This value range is available when using a 525-line standard.
Selects the line on which the vertical
interval ends
23
b
b. This value is fixed at 22 when using a 625-line standard.
Lock V Bit On Line
m a
10 Active video starts on line 10
20 Active video starts on line 20
Horizontal Crop
Off Disables this feature
On Enables this feature
Crop Left 0 to 350
Number of pixels to crop from the
beginning of the line
Crop Right 0 to 350
Number of pixels to crop from the end of
the line backwards
Table 4.6 Proc Amp Menu Items
Tab Title Item Parameters Description
Proc Amp
Video Gain (%)
m
50 to 150 Adjusts the output video gain level
Chroma Gain (%)
m
50 to 150 Adjusts the output video chroma gain
CB Gain (%)
m
50 to 150
Adjusts the output C
B
gain
Black Level Offset
(IRE)
m
-7.2 to 51.7 Adjusts the output black level of the card
Super Black
Pass Enables the input to pass without clipping
Clip Clips any value below black
Proc Amp Reset
Resets all Proc Amp controls to the
factory default values