User manual

Technical Specifications
Table 9. Technical Specifications
Category Parameter Specification
Signal Standards Accepted NTSC, PAL-B, PAL-M, PAL-N
Number of Inputs 1
Composite Video 1V p-p nominal
Input Impedance
75Ω terminating
Return Loss >42dB to 6MHz
Composite
Video Input
Common Mode Rejection >58dB @ 50/60Hz
Signal Standards SMPTE 259M-C, 270Mb/s 525/625 lines, 10 bits
Number of Outputs 4
Output Return Loss >17dB to 270MHz
Signal Level 800mV ± 10%
DC Offset <100mV
Rise and Fall Time >800pS (20 - 80%, ±15%)
Component
SDI Output
Overshoot <10% typical
Signal Standards Accepted NTSC, PAL, PAL-M, PAL-N
Number of Inputs 1
Input Impedance
75Ω
Analog
Reference
Return Loss >35dB to 5MHz
Luminance Frequency Response ± 0.25dB to 5MHz, < -0.8dB @ 5.75MHz
RMS SNR, Luma Channel > 56dB to 5.5MHz, unweighted
RMS SNR, Chroma Channel > 56dB to 5.5MHz, unweighted
Performance
H and V phasing Infinite with frame sync, 2 lines without frame sync
Minimum
Delay in
Line/Frame
Delay Mode
Minimum Delay
NTSC: 1 Line + 52.1µS
PAL: 1 Line + 15.7µS
Power
Consumption
Total 4.2W
ADC-8032B up to 2 video lines
Tracking
Delay Pulse
ADC-8032B-S up to 2 video fields
Specifications are subject to change without notification
7-2 • Specifications ADC-8032B User Manual (Iss. 02B)