User manual

Confirm Upgrade
With the card installed in the frame and powered up:
1. Select Bank A, and rotate Function Select to position F.
2. Hold Mode Select down for one second to unlock switch access.
The ACCESS LED is on.
3. Rotate Function Select to position 1.
4. Hold Mode Select up for one second to enable the Heads Up display.
5. Rotate Function Select to position 0.
6. Toggle Mode Select down to position C.
7. Hold Mode Select down for several seconds to display the card model installed.
On the Heads Up display, “ADC-8032B-S” is displayed, indicating that the upgrade
was successful.
8. Reconfigure the card settings from the tables in the Record Settings section.
9. Refer to the relevant chapters in this user manual for information on the operation of
the full frame synchronizer.
If you have any questions or encounter any problems, please contact Ross Video Customer Service at
[phone].
6-6 • Frame Synchronizer Upgrade ADC-8032B User Manual (Iss. 02B)