User manual

Bank C-C: Forced Black
This selection forces the output to black. Use the following steps to enable or disable the Forced
Black mode:
1. Select Bank C, and rotate Function Select to position C.
2. Select the desired mode according to the table below:
• Toggle Mode Select up and hold for one second to force the output to
black.
• Toggle Mode Select down to disable the Forced Black mode.
Bank Function Select Mode Select Heads-Up Display Label Default
C C
+ (h) On
- Off
FRCD BLK ON
OFF
OFF
Bank C-D: Forced Mono
This selection forces the output to monochrome (SDI). Use the following steps to enable or disable
the Forced Monochrome mode:
1. Select Bank C, and rotate Function Select to position D.
2. Select the desired mode according to the table below:
• Toggle Mode Select up and hold for one second to force the output to
monochrome.
• Toggle Mode Select down to disable the Forced Monochrome mode.
Bank Function Select Mode Select Heads-Up Display Label Default
C D
+ (h) On
- Off
FRCD MONO ON
OFF
OFF
4-24 • Using Banks ADC-8032B User Manual (Iss. 02B)